Refer to Setting Up Communication with the Monitoring Platform on page 6. CommunicationĬommunication settings can be configured only after communication connections are complete. Tap OK to return to the Commissioning menu.The steadily lit green inverter LED indicates this mode. When working voltage is reached, the inverter enters Production mode and produces power. This mode is indicated by the flickering green inverter LED. When the inverter starts converting power after the initial connection to the AC, the inverter enters Wake up mode until its working voltage is reached. When you turn ON the inverter ON/OFF/P switch, the DC cables carry a high Voltage and the Power Optimizers no longer output a safe output. When Pairing Complete is displayed, the system startup process begins: Since the inverter is ON, the Power Optimizers start producing power and the inverter starts converting AC.From the Commissioning menu, select Pairing.To save the information to a read-only file, tap the PDF icon (iOS) or the JPEG icon (Android) at the bottom of the screen.If relevant, from the Language drop-down list, select your language and tap Set Language.From the Country & Grid drop-down list, select the required option and tap Set Country & Grid.From the Commissioning screen, select Country & Grid.Unless these settings are selected, the inverter will not start production. The inverter must be configured to the proper settings in order to ensure that it complies with the country grid code and functions. The mobile device creates a Wi-Fi connection with the inverter and displays the main Commissioning screen. ![]() Open SetApp and follow the on-screen instructions (scan the inverter QR code, move the ON/OFF/P switch to P position for 2 seconds, and release).If not already ON – turn ON AC to the inverter by turning ON the circuit breaker on the main distribution panel.If the inverter has already been activated and commissioned: During first-time installation: Upon activation completion, in the NetApp, tap Start Commissioning.Menus may vary in your application depending on your system type. This section describes how to use the NetApp menus for commissioning and configuring the inverter settings. Step 2: Commissioning and Configuring the Installation ▪ Select Start Commissioning for pairing and other system configurations. ![]() ▪ Select Connect to Another Device to continue activating additional inverters.
0 Comments
Leave a Reply. |